Precision cast stainless steel submersible centrifugal pump with technopolymer liquid vortex impeller, suitable for pumping sewer water and waste water in general containing solid matter to a maximum size of 50 mm

Stainless steel pump casing, seal cover, motor casing and cover with handle.
Precision cast stainless steel impeller
Handle with insulating rubber cover
AISI 316 stainless steel drive shaft
Double mechanical seal with intermediate oil chamber (atoxic oil), in carbon/aluminium on the motor side and silicon carbide/silicon carbide on the pump side.

Dry, asynchronous, sealed and cooled by the pumped liquid.
Rotor mounted on greased for-life ball bearings, oversized and selected to guarantee greater noise reduction and duration. Thermo-amperometric protection as standard for single-phase version, and the user’s responsibility for the three-phase version.
Constantly active capacitor on the single-phase version.
Construction in accordance with the IEC 2-3
IEC 61-69 (EN 60335-2-41) standards.
Motor protection class: IP 68
Insulation class: F
Standard voltage: 220-240V 50Hz Single-phase
Continual running with liquid at 35 °C and pump completely submerged.
The single-phase version can be supplied with float for automatic function.
Power supply cable: 10 metres of H07RN-F cable with Shuko plug for the single-phase version and 10 meters of H07RN-F cable for the three-phase version.

TECHNICAL SPECIFICATIONS

Operating range: from 0 to 24 m3/h with head up to 14 meters.
Pumped liquid: non aggressive sewer water and waste water in general.
Liquid temperature range:
from 0° to +35°C for household use (EN 60335-2-41)
from 0°C to +50°C for other uses
Maximum ambient temperature for pump running with submerged motor: +40°C
Maximum immersion depth: 10 meters
Installation: fixed or portable, vertical

Supplied with a UK 3 Pin Plug